The post 6″ Lenox Power Blast Fire Rescue 10/14 TPI 5Pcs first appeared on LA Cutting Products.

The post 8″ Lenox Power Blast Fire Rescue 10/14 TPI 5Pcs first appeared on LA Cutting Products.

The post 6″ Lenox Plaster 6 TPI 5Pcs first appeared on LA Cutting Products.

The post 9″ Lenox Power Blast Nail Embedded Wood 6 TPI 5Pcs first appeared on LA Cutting Products.

The post 10″ Irwin 80T Marothon Carbide Thin Kerf first appeared on LA Cutting Products.

WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed.

• Diameter= 12″
• Kerf= .128″
• Plate= .102″
• Bore= 1″
• Teeth= 80
• Hook= 5 Degree Negative

The post Afila 12″ x .128″x .102″ x 1″ 80 Teeth first appeared on LA Cutting Products.

Long Life:

• Advanced diamond technology provides extreme durability in metal cutting applications, leading to increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cut-off wheels.

Diameter retention:

• Because LENOX MetalMax is made with diamonds, it doesn’t get smaller. The cutting depth stays the same throughout its life, meaning better control, reach and precision.

Less dust residue:

• With LENOX MetalMax there is less odor and dust residue as the wheel does not wear down like bonded abrasives. Sparks originate only from the material being cut.

One wheel, multiple materials:

• One wheel, multiple materials: MetalMax is recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminum**and non-ferrous metals.

The post LENOX MetalMax first appeared on LA Cutting Products.